Top  >>  Catalog  >>  FAQ  >>  Product Question
 
NARROW SEARCH
Search:
Product Question

  1. How much does ViS Hood and Trunk weight?
  2. What is involved to install VIS bodykits?
  3. What set VIS Carbon Fiber hoods apart from other hoods in the market?
  4. What kind of materials are used to make VIS bumpers?
  5. What is the return policy?
  6. What do I do in the event of shipping damage?
  7. Do I reuse the hood struts / trunk spring or struts?
  8. Is my Carbon Fiber Hood defective?
  9. Is it legal?
  10. What is the cancellation policy for Special Order Parts??
  11. Can I install the hood myself?
  12. Excessive Gap with the hood install?


  1. How much does ViS Hood and Trunk weight?

    Our hoods and trunks are ultra-light weight. The average weight of each hood is about 15 lbs. Of course, hoods for bigger car models or trucks will weigh more, but they are definitely much more lighter than the originals. Trunks and hatches are even lighter as it is smaller than a hood. Average weight is about 13 lbs.

    [Back To Top]

  2. What is involved to install VIS bodykits?

    All bumpers, side skirts, spoilers, or hoods require professional installation. That means that these parts need to be done by experienced body shops that have done bodykits before, not just a regular collision shop. Due to the fact that these are aftermarket parts, some modifications of the parts and/or vehicles maybe necessary. Make sure an installation fit has been done first before priming and painting. Once painting has been done, it is very difficult to modify to fit without destroying the paint. You would have to paint again! Generally speaking, our kits do not have fitment problems. Some bumpers are made to the Japanese spec of some car models. In these cases, more modification may be involved. When in doubt, please call/email us. We are more than happy to answer your questions.

    Fiberglass parts are manufactures only uses hand-laid which is more labor intensive but the quality of the fiberglass is far superior. Fiberglass parts have a primer finish, which can be sanded and painted on. A primer coat, sanding, trimming, cutting, shaving, refilling, remolding, removing reinforcement bar or shock absorber may be necessary to ensure proper fitment. In some case the use of professional heat gun maybe necessary for achieving proper fitment. All Aftermarket Fiberglass body kit parts do require pre-fitting onto the car before they are painted and installed. 



    [Back To Top]

  3. What set VIS Carbon Fiber hoods apart from other hoods in the market?
    Our grade "A" carbon fiber hoods are the best in the industry. Each hood is built with a strong carbon fiber skeleton. The outer layer is hand-laid with carbon fiber along with several layers of clear coating that provides the Hi-gloss show-quality finish that other hoods just cannot imitate. The outermost layer of clear coats is a UV coating that protects it from the harmful rays of the sun. Unlike other hoods in the market, our hoods do not fade and turn yellow in a few months. The underside of each OEM hood is reinforced fiberglass with a one-piece fiberglass covering the underling skeleton to provide a clean factory look. We also have double-sided carbon fiber hoods whose skeletons are covered with carbon fiber for more refined look.

    [Back To Top]

  4. What kind of materials are used to make VIS bumpers?
    All bumpers and bodykits in general are made out of fiberglass unless stated otherwise. Several layers of fiberglass are used to insure strength and durability of each bumper. Each bumper is primered with a smooth yellow finish. New and improved PolyFiber material has been developed that is as flexible as polyurethane but still made out of fiberglass. See FAQ question related to it below.

    [Back To Top]

  5. What is the return policy?

     

     Please see our Terms-And-Conditions page for detail.



    [Back To Top]

  6. What do I do in the event of shipping damage?

     

    Some products may be damaged during transit. Please inspect all packages immediately in the presence of the delivery personnel upon receipt of the shipment. Do not sign documents until all packages have been inspected. In the event of damaged merchandise, please note “damaged” on the document and have the delivery personnel sign it as verification. Very important It is very "important" not put any other comments which may incriminate yourself in the claim procedure.Retain all boxes and other packaging material as the package may be subject to inspection by the carrier. Call VIS Racing Sports and email picture(s) of the damaged products(s)within 24 hours of receipt of the shipment to file a claim request. Failure to comply with this policy may result in the denial of your claim.



    [Back To Top]

  7. Do I reuse the hood struts / trunk spring or struts?

    The gas struts that support some hoods, as well as the gas struts/ tension rods that support all trunks, create an immense amount of pressure, which aids in opening and lifting heavier OEM hoods/trunks/hatches.  The products from the factory are not a composite part like our products, so the tensile strength that those struts/rods produce, is designed for the rigidity and weight of those OEM products.  What that will cause is ill fitment, bulging, and sometimes, and in some severe cases, cracks.  If any of these happen, you would have to remove both struts/rods immediately, and put a heavy object over a towel or protective layer, over the problem area and let it stay in the sun, for a few days and that could potentially level out the product again, IF it was not like that for a while.



    [Back To Top]

  8. Is my Carbon Fiber Hood defective?

    All Aftermarket carbon fiber Hoods require professional Body Shop installation. Some adjustments or modification may be necessary for installation which may include drilling out or enlarge the stock holes for windshield nozzles and the underside heat shield mounting holes.  Body shop would also have to transfer all the necessary mounting hardware, such as latch, windshield nozzles, and hinges.  These are considered typical body work and installation steps; the item is NOT defective. In addition, most carbon fiber products are hand-crafted so no two items will be identical. Small imperfections such as wave within the weave, small bubbles, and clear coat blemishes are inevitable and will not be subjected to returns and/or exchanges.



    [Back To Top]

  9. Is it legal?

    Items sold by VIS Racing Sports Inc. ("VIS") may not be legal for street use in all states and none of the parts from our company are DOT approved. It is the purchaser's responsibility to comply with applicable state laws. All fiberglass or carbon fiber parts have no warranty. All goods are sold as is unless otherwise specified. There are no other warranties, express, implied, including any warranty of merchantability or fitness for a particular purpose.



    [Back To Top]

  10. What is the cancellation policy for Special Order Parts??

    All special orders require a nonrefundable deposit of the total costs. If there is any cancellation for any reason by the Buyer, that deposit is forfeited immediately to Vis Racing Sports Inc. Vis shall not be responsible for any late shipments. All shipping dates given are approximate. Buyer shall not be entitled to chargebacks, reductions of price, or other offsets as result of late shipment or failure to deliver in estimated time of delivery. If special order item(s) are left over 30 days from time of Vis receiving parts in stock; and Buyer has not made any attempt whatsoever to claim their order, then the order shall be considered canceled and all monies previously deposited shall be forfeited to Vis.

    [Back To Top]

  11. Can I install the hood myself?

    All Aftermarket hoods require professional Body Shop installation. Adjustment of, but not limited to, latches, hooks, or fenders may be necessary as part of the normal installation of all hoods. Modification may be necessary for installation which may include drilling out the stock holes for windshield nozzles and the underside heat shield mounting holes.  Body shop would also have to transfer all the necessary mounting hardware, such as latch, windshield nozzles, and hinges.  Please apply loctite to all mounting hardware and recheck during each oil change. These are considered typical body work and installation steps; the item is NOT defective.  All hoods require hood pins for safety reason. All hoods cannot sustain any force or weight on the surface. Do not put weight on the hood surface as it could crack the hood. 


    Fiberglass parts (Bodykit, hood and trunk) are manufactures only uses hand-laid which is more labor intensive but the quality of the fiberglass is far superior. Fiberglass parts have a primer finish, which can be sanded and painted on. A primer coat, sanding, trimming, cutting, shaving, refilling, remolding, removing reinforcement bar or shock absorber may be necessary to ensure proper fitment and finish. All Aftermarket Fiberglass parts do require pre-fitting onto the car before they are painted and installed. 



    [Back To Top]

  12. Excessive Gap with the hood install?


    Adjustment is required for any hood installation.   Gap really isn’t too bad, and can be fixed, it’s just how meticulous you are with adjusting.  To do it correctly (this is even if you put your factory hood back on), you would have to loosen (not remove) the all the bolts attaching the hood to the hinges to get that lined up initially.  Once that’s complete, you will close the hood and check that there is not excessive tension on the front latch.  If there is, you would loosen that and adjust until it closes like the factory hood.  Do not gravity drop the hood to get it closed, or press on the front too hard (or press over and over) to close it.  Adjust pressure with your palm over the latch area until it latches.



    [Back To Top]

16 up Ford Focus AMS Carbon Fiber Hood
2016 up Honda Civic V Spec Carbon Hood
EVO 10 Ultra V Rear Bumper
Golf 7 Apex Complete Body Kit
Subaru Impreza 4Dr 22B Style Adjustable Spoiler